COMEPAL CR - CX

  • Max capacity: 63 - 5000 kg
  • 2 lifting speeds
  • Lifting height: standard 3 m
  • Supply voltage: 400 V, 50 Hz
  • Electric limit switch up and down
  • Galvanized load chain + chain collector
  • Removable pendant, low control voltage 48V + emergency stop.
  • Friction torque limiter.
  • COMEPAL CR & CX is ideally combined with different trolleys installed on monorail tracks, jib cranes and cranes:
  • a pushed or chain driven travelling
  • a motorised variable speed travelling
  • manual or electric travelling in the hollow profile COMEGYSTEME
  • in COMEPAL CHPP-CHPC stainless type

COMEPAL CVV

  • Max capacity: 125 - 2500 kg
  • Variable lifting speeds (Inverter)
  • Lifting height: standard 3 m
  • Supply voltage: 400 V, 50 Hz
  • Electric limit switch up and down
  • Galvanized load chain + chain collector
  • Removable pendant, low control voltage 48V + emergency stop.
  • Friction torque limiter
  • COMEPAL CVV is ideally combined with different trolleys installed on monorail tracks, jib cranes and cranes:
  • a pushed or chain driven travelling
  • a motorised variable speed travelling
  • manual or electric travelling in the hollow profile COMEGYSTEME
  • in COMEPAL CHPP-CHPC stainless type

COMEPAL CER2

  • Max capacity: 125 - 5000 kg
  • 2 lifting speeds or variable lifting speeds with PROPORTIONAL buttons
  • Lifting height: standard 3 m
  • Supply voltage: 400 V, 50 Hz
  • Electric limit switch up and down
  • Nickel plated load chain + chain collector
  • Pendant button box, control voltage 24V + emergency stop.
  • Overload limiter

COMEPAL CDER2

  • Max capacity: 125 - 250 kg
  • 2 lifting speeds
  • Lifting height: standard 1,8 m (max. 4 m)
  • Supply voltage: 400 V, 50 Hz
  • Limit switch up and down
  • Thermal engine protection
  • Electromagnetic brake

COMEPAL CM

  • 2 options: button box command or control on the hook
  • Max capacity: 60 - 1000 kg
  • 1 or 2 lifting speeds
  • Lifting height (button box command): standard 3 m
  • Lifting height (control on the hook): standard 1,8 m (max. 4 m)
  • Supply voltage: 230 V, 50 Hz
  • Electric limit switch up and down
  • Galvanized load chain + chain collector
  • Emergency stop
  • Friction torque limiter

COMEPAL VM

  • Max capacity: 2 000 - 20 000 kg
  • Indoor use only
  • 2 lifting speed (standard)
  • 2 traveling speeds (standard)
  • Lifting height: 6 - 9,5 m (VM1, VM2) and 8 - 13 m (VM3)
  • Supply voltage: 400 V, 50 Hz
  • HPR monorail and birail version steering carriage.
  • Electric limit switch up and down
  • Thermal protection on motors
  • Electromechanical load limiter as standard.
  • Electrical equipment for bridge kit.

COMEPAL VT

  • Max capacity: 2 000 - 20 000 kg
  • 2 speed ratio (1:6) lifting motor with bimetal sensors.
  • Minimum beam width : 300 mm.
  • Maintenance-free DC disc brake.
  • 4 position cam limit switches (up, down, slow down high position, phase inversion protection).
  • Load limiter.
  • Variable speed steering motor from 3 to 20 m/min.
  • Electrical box with switchgear and low-voltage transformer. Safety on/off switch.
  • Standard power supply 380V/400V/415V/50Hz, 440V/460V/60Hz.
  • Motor protection IP55 / Class F.

COMEPAL HPR

  • Max capacity: 250 - 5000 kg
  • Lifting height: standard 3 m
  • Low headroom trolley with manual chain hoist COMEPAL PMC type.
  • Controlled via handwheel and chain.
  • Trolley adjustable according to beam size up to 300 mm width.
  • Steel rollers machined and compatible with all types of I and H beams.
  • Rotating hooks equipped with safety latches.
  • Bearings lubricated for life (without maintenance).
  • Anti-drop and anti-derailment device.
  • Options:
  • Other lifting heights and capacities on request.
  • Push trolley available on request.
  • Wider flanges than 300 mm.
  • Stainless hooks and chains available on request.
  • Chain collector.
  • Load limitor.

COMEPAL PCMC

  • Max capacity: 250 - 5000 kg
  • Lifting height: standard 3, 6 or 9 m
  • Galvanized or Stainless load chain

PMC-ALU

  • Manual chain hoist robust and effective entirely built in aluminum.
  • Max capacity: 250 - 3000 kg
  • Lifting height: standard 3 m
  • Galvanized or Stainless load chain
  • Duable disk lifting brake
  • Options:
  • Low headroom trolley.
  • Different capacity and height.
  • Chain bag.
  • Load limiter.
  • Stainless steel hook and chain on request.

TCP

  • Portable, ergonomic, light and handy winches.
  • Conform to the Directive Machine 2006/42/CE.
  • Unlimited lifting height.
  • End stops.
  • Hook with safety latch.
  • Integrated motor brake.
  • Button box with emergency stop and IP 65 protection.
  • Heating protection on the motor.
  • Supply voltage: 1 Ph 230 V - 50 Hz - 3.5 A.

CH - HOIST TROLLEY

  • Max capacity: 250 - 5000 kg
  • Adjustment of the width by screw.
  • Length of hand chain: standard 2,4 m.

CHPP

  • Max capacity: 250 - 1000 kg
  • Adjustment of the width by screw.
  • Length of hand chain: standard 2,4 m.
  • Trolleys hoists fully built in 316L stainless steel (including bearings).
  • Manual travelling.
  • Beam width adjustable by stacking stainless steel spacers.
  • Complete manufacturing 316L stainless steel corrosion resistant.
  • Permanently greased bearings (no maintenance).
  • Rubber end-stop.
  • Anti-drop and anti-derailment device.

CHPC

  • Max capacity: 250 - 1000 kg
  • Adjustment of the width by screw.
  • Length of hand chain: standard 2,4 m.
  • Trolleys hoists fully built in 316L stainless steel (including bearings).
  • Chain travelling.
  • Beam width adjustable by stacking stainless steel spacers.
  • Complete manufacturing 316L stainless steel corrosion resistant.
  • Permanently greased bearings (no maintenance).
  • Steering and handling chain in 316L stainless steel.
  • Rubber end-stop.
  • Anti-drop and anti-derailment device.