Elektronički uređaji

Expertcare-GB.pdf

• Smartphone application for remoting EUROBLOC VT
• ExpertCare is a VERLINDE smart and friendly application enabling the remote display of information from floor level of the MT2 electronic monitoring module of EUROBLOC VT wire rope hoists mounted on overhead cranes.
• The immediate advantages are partly the simplicity of the tool that allows the display of information on a smartphone or tablet run on Androïd or iOS while the operator stays at floor level and partly on savings made on resources as the use of an inspection platform is ipso facto no longer required for such a simple inspection.
• Having an access ot this datas from Expertcare is a great tool for hoist maintenance program but also for predictive maintenance to avoid any possible failure of your production process which may generate additional cost. This new equipement will be helpfull too concerning SWP calculation and General Overhaul.
• Of a dongle enabling MT2/MT4 data to be read from the floor. The wireless communication range between the dongle and a reading device is 15 m as standard or 50 m with an external antenna.
• A smartphone or tablet to run the application.



The ExpertCare application enables the monitoring of :

• The remaining lifespan of the hoist, brake and contactors.
• Faults and alarms.
• Display of load, overload case of the lifting unit.
• MT2/MT4 internal temperature.
• Operating time of the hoist.
• Number of emergency stops.

EuromoteH_GB.pdf

• Electronic force gauges with digital readout for loads from 200 to 32000 kg
• Precision is +/- 0,1% of rated capacity
• Standard functions : overload signal (110% of max load), calibration
• Reset, Total, complete deletion (except PEV 1 where “total” and “complete deletion” are options)
• Excellent legibility with large size display (LCD or LED)
• Readings are logged
• Working temperature -20° to +60° C
• Protection : IP 55
• Delivered with 2 shackles and top and bottom mounting hardware
• Delivered with rechargeable batteries and charger
• Large-sized display 25,4 mm digit on 5 LED display
• Infra-red remote control
• Carry case
• Preselection of load
• Intensive use batteries
• Stainless steel version of gauge available
• Tropicalisation and IP 65 protection
• Printer integrated in gauge
• Radio link, Bluetooth or Wifi

EuromoteH_GB.pdf

• Radio remote control system for hoists and travelling cranes
• The EUROMOTE remote control systems have been specially designed for use with the EUROBLOC and EUROCHAIN hoisting unit and the crane components of VERLINDE.
• Adapted to the most severe industrial conditions, the EUROMOTE remote control systems stand out through their ease of use, great flexibility and reliability. They will enable you to improve the productivity of your operators and the safety of lifting manoeuvres and achieve productivity gains and shorter down-times.

Micromote_gb.pdf

• Radio remote control system for hoists and travelling cranes
• The MICROMOTE remote control systems have been specially designed for use with the EUROBLOC and EUROCHAIN hoisting unit and the crane components of VERLINDE.
• Adapted to the most severe industrial conditions, the MICROMOTE remote control systems stand out through their ease of use, great flexibility and reliability. They will enable you to improve the productivity of your operators and the safety of lifting manoeuvres and achieve productivity gains and shorter down-times.

Variator_gb.pdf

• Travel and lift speed control system for hoists and travelling cranes
• VARIATOR speed control systems offer greater operating precision and flexibility for your lifting equipment.
• Reduces the pendulum effect and can even cancel it (ESP option)
• Increases the mechanical life span of suspended cranes and the electrical life span of lift and trolley motors
• Increases productivity of your hoist station
• Reduces energy consumption and the size of supply lines
• Reduces maintenance costs
• Optimal utilisation of work space
• Smaller investments and faster return on investment

• Lift speed control system for hoists and travelling cranes
• This option enables hoist speed to be automatically adapted to the hook suspended load.
• This recent feature allows lift speed and motor torque to be dissociated: speed - for the reduction of cycle time to enhance hoist station productivity when running empty, and motor torque - for lifting when loaded to ensure precision travel with a maximum power margin.
• Up to 50% energy savings
• Speed depending on load obtained automatically
• Productivity and safety enhancement
• Enhancement of load travel accuracy
• Best return on investment
• Optimal use of work space and of approach data of hook
• Increased motor life span
• Use of low amperage for crane power supply to reduce the cost of investment in power-feeding systems
• Depending on standards and local tax systems, grants can be obtained within the framework of energy saving policies

• Lift speed control system for hoists and travelling cranes
• This option allows reduction of cycle time (faster return speed for empty returns) therefore of FEM group duty.
• Type S (ESR) motors can be operated at full speed at up to 40% of the rated load, the max. motor speed remaining at 3000 rpm. At 20% of the load, the rated speed is the equivalent of 150% of listed speed. With nominal load, the rated speed is the equivalent of the listed
• Maximum ESR speed, 1.5 times greater than standard speed
• Productivity enhancement
• Enhancement of load travel accuracy
• Optimal use of work space and approach data of hook
• S (ESR) motors use full speed up to 40% of rated load, with maximum motor rotational speed remaining at 3000 rpm. At 20% of the load, the nominal speed is equal to 150% of the catalog speed. At nominal load, the nominal speed is equal to the catalog speed.

• Automatic load swinging (pendulum) correction system
• The effects of the swinging of loads (pendulum effect) travelling under a suspended crane were traditionally reduced if the operator had enough experience to manage load inertia movement during travel.
• Easy parameterization of over length slinging from the control interface
• Increased productivity of the hoist station
• ESP allows to use of the whole work space; swing correction is achieved throughout load travel whatever the height and position of the load
• Enhanced safety for the user personnel of the hoist station
• The operator can concentrate on the load to be shifted and not on the movements of the travelling crane
• Reduction of maintenance coats (reduction of the effects of mechanical stress on the structure and electrical stress on the motors)
• The principle of the control of load swinging is based on the calculation of swing movement time and lifting height. ESP calculates and automatically corrects the to-and-fro movements of the hook suspended load.